The steam and condensation produced by your sterilizer can be
time-consuming and messy to empty from condensate tanks. It can even
melt plumbing if not cooled sufficiently before pouring down the drain.
Finally, a product designed to provide a reliable and efficient
solution. The VistaCool� direct-to-drain system is designed to reduce
the temperature of sterilizer wastewater � eliminating condensate
bottles and tanks! Also, using VistaCool with larger chamber
sterilizers can reduce maintenance by allowing you to use fresh water
with every cycle.
There are two models available: a single unit, designed to be compatible
with the Ritter M3 and a double unit, designed to be compatible with
any two current Ritter automatic sterilizers (Ritter M3, M9 and M11).
Single Unit
Tank material: Polyethylene � Natural White
Tank dimensions w/fittings: 7.6" W x 7.6" L x 13.75" H (19.3 cm x 19.3 cm x 34.9 cm)
Tank volume: 1.50 gal (5.70 liters)
Tank weight w/water & fittings: 15.0 lb (6.8 kg)
Approximate shipping weight: 7.0 lb (3.2 kg)
Coolant water connection: Supply fitting for �" O.D. required. To be provided by installer.
Max coolant water pressure: 100 psi (6.9 bar)
Max altitude (If using air gap): 6,561 ft (2,000 m)
Double Unit
Tank material: Polyethylene � Natural White
Tank dimensions w/fittings: 4.0" W x 13.0" L x 17.0" H (10.2 cm x 33.1 cm x 43.2 cm)
Tank volume: 3.00 gal (11.40 liters)
Tank weight w/water & fittings: 28.0 lb (12.7 kg)
Approximate shipping weight: 10.0 lb (4.5 kg)
Coolant water connection: Supply fitting for �" O.D. required. To be provided by installer.
Max coolant water pressure: 100 psi (6.9 bar)
Max altitude (If using air gap): 6,561 ft (2,000 m)
|
